Ethernet not working windows 10 – Easy Fix | New 2021

Table Of Contents[ Show ]

1. Ethernet not working windows 10 – 8 Best Method
   1. Method 1: Run Network Troubleshooter
   2. Method 2: Reset your Ethernet adapter
   3. Method 3: Enable Ethernet Device, and Update Drivers
   4. Method 4: Enable Ethernet connection
   5. Method 5: Temporarily disable antivirus and firewall
   6. Method 6: Flush DNS, Reset TCP/IP
   7. Method 7: Change the power management settings for Ethernet
   8. Method 8: Use Google DNS

Ethernet not working windows 10: You need to resolve the problem if you are unable to connect to the internet via Ethernet cable. The Network and Sharing Center will show that your computer doesn’t recognize your ethernet connection.

However, if you attempt to access the internet while connected to WiFi using the same connection, you will find that the problem is caused by incorrect network configuration, corrupted or outdated network drivers or damaged or defective ethernet cables, hardware issues, or other problems.

This issue is a major problem for users who prefer Ethernet to WiFi. They are unable to connect to the Internet via an Ethernet cable. Ethernet problems in Windows 10 are common after you’ve upgraded or updated to Windows 10.

There are many solutions that can be used to resolve this issue. Let’s now see how to fix Ethernet not working in Windows 10 using the following troubleshooting guide.

Create a restore point in case of an emergency.

These are the steps you need to take to solve the problem.

• Connect the Ethernet cable to another port on your router. There is a chance that the port may be damaged.
• You might want to try another cable.
• Reconnect the cable by unplugging it.
• To see if the problem has been resolved, connect the Ethernet to another computer. If the ethernet does not work on another PC, your computer hardware may be damaged.

Ethernet not working windows 10 – 8 Best Method

Method 1: Run Network Troubleshooter

1. Press Windows Key + 1 to open Settings, then click on Security & Update.

2. Select Troubleshoot from the left-hand navigation.

3. Click on Troubleshoot Internet Connections, then click Run troubleshooter

4. Follow the on-screen instructions to run the troubleshooter.

5. Reboot your computer to save changes

Method 2: Reset your Ethernet adapter

1. Press Windows Key + I for Settings, then click on the Internet & Network icon

2. Click on Status from the left-hand navigation.

3. Now scroll to the bottom of Status and click on Reset link.

4. Click on the ” Reset now button on the Network reset page.

5. Now, connect the Ethernet to your computer and check if it works.

Method 3: Enable Ethernet Device, and Update Drivers

1. Press Windows Key + R, then type devmgmt.msc, and hit Enter to open device manager.

2. Expand Network adapters. Then right-click your Ethernet device, and choose Enable.

Note: Skip this step if it’s already disabled.

3. Return to the original window and right-click it.

4. Select ” Automatically Search for Updated Driver Software” to let the program automatically install any new drivers.

5. Reboot your computer to save the changes. Check again to see if Fix Ethernet Problem in Windows 10 is possible.

6. If not, go to Device Manager and right-click your Ethernet device. Select Update Driver.

7. Now select ” Browse My Computer for Driver Software”

8. Now, click ” Let’s choose from the available drivers for my computer“.

9. Select the latest realtek PCIe Family Controller driver, and then click Next.

Let it install the drivers and reboot your computer.

Read | Fix Ping Spikes in WiFi or Ethernet on Windows 11/10

Method 4: Enable Ethernet connection

1. Press Windows Key + R, then type .cpl, and hit Enter. This will open Network Connects.

2. Click on Ethernet connection, and choose Enable.

3. This will allow you to connect to the Ethernet network.

Method 5: Temporarily disable antivirus and firewall

1. Click on the Antivirus Software icon in the system tray. Select Disable.

2. Next, choose the time period for which the Antivirus will be disabled.

Take note: Use the shortest amount of time, such as 15 minutes or 30 minutes.

3. Once you have done that, go back to the Internet to check if the error has been resolved.

4. Type control into Windows Search, then click on Control Panel in the search result.

Next, click on Security and then on Windows Firewall.

6. Now, click on To turn Windows Firewall off or on.

7. Turn off Windows Firewall. Try accessing the internet again to see if Ethernet is working in Windows 10.

If this doesn’t work, you can try the same steps again to turn on your Firewall.

Method 6: Flush DNS, Reset TCP/IP

1. Right-click Windows Button, and select ” Command prompt(Admin).

2. Now type the following command, and hit Enter after each one.

ipconfig: /release Ipconfig /flushdns Ipconfig/renew

3. Open Admin Command Prompt again and type the following. Hit enter after each one.

ipconfig /flushdns nbtstat -r netsh int ip reset netsh winsock reset netsh winsock reset catalog netsh int ipv4 reset reset.log

4. Reboot to apply the changes. To apply changes, reboot.

Method 7: Change the power management settings for Ethernet

1. Press Windows Key + R, then type devmgmt.msc, and hit Enter to open device manager.

2. Expand Network adapters. Next, right-click your Ethernet device to select Properties.

3. Change to Energy Management tab in the Ethernet Properties window.

4. Next, Uncheck ” To save power, allow the computer to turn this device off.

5. Click Apply and then click OK.

6. Reboot your computer to save changes

Method 8: Use Google DNS

1. Open Control Panel, click on Internet and Network.

2. Next, click Sharing Center and then click Modify adapter settings.

3. Select your Wi-Fi network, then double-click on it to select Properties.

4. Now, select Internet Protocol version 4 (TCP/IPv4). Click Properties.

5. Checkmark ” Use these DNS server addresses” then type the following:

Preferred DNS Server: 8.8.8

Alternate DNS Server: 8.8.4.4

6. Close all files and you might be able Fix Ethernet Not working in Windows 10.

Wrapping Up | Ethernet not working windows 10

Ethernet not working on Windows 10. The problem is common and it’s not because of your internet connection. It’s possible you have a faulty ethernet cable, so if you haven’t checked that, do so now. There might be something wrong with your laptop or your network card, so if you haven’t checked that, do so now.